What Is Dry Ice Blasting and How Does It Clean Industrial Equipment Without Abrasive Residue?

16-11-2026

What if cleaning industrial equipment did not mean creating another sort of mess?

We understand the problem with grease-covered machines: stubborn deposits and production residue can be quite difficult to remove, but the cleaning process can introduce new sorts of challenges. Water may leave unwanted moisture, chemicals can raise handling concerns, and abrasive materials can create additional waste that needs to be cleared away.

For industries where equipment cleanliness and maintenance efficiency matter, these extra steps can cost valuable time. Dry ice blasting is what works best in such a situation, using CO2 pellets propelled by compressed air to loosen contaminants without leaving spent blast media behind.

So how does this process work? Read on to understand the practical advantages and the factors businesses should consider when choosing an industrial cleaning solution.

What Is Dry Ice Blasting?

Dry ice blasting uses solid CO2 pellets and compressed air to loosen contaminants without leaving spent blasting media behind.

How does dry ice cleaning work?

Dry ice blasting is effective because it removes contaminants using solid CO2 pellets and compressed air without leaving behind spent blasting media. The pellets help loosen deposits through impact and thermal shock while rapidly changing from solid to gas.

This makes the process useful for cleaning suitable industrial machinery and selected surfaces without adding moisture or creating extra work.

Unlike other cleaning methods that rely on conventional abrasive media, dry ice blasting can reduce secondary cleanup while businesses maintain equipment more effectively.

Please note: Results depend on the contaminant and the operator’s expertise.

Why does dry ice blasting work? The three cleaning mechanisms

Here is a quick answer for you: dry ice blasting combines three mechanisms in one cleaning process. The table below explains each one.

The three cleaning mechanisms of dry ice blasting
Cleaning mechanism What it does
Impact CO2 pellets strike the surface and help loosen stubborn deposits.
Thermal shock Rapid cooling can make certain contaminants brittle and easier to remove.
Sublimation Solid CO2 turns directly into gas, so the blasting medium leaves no residue.

These mechanisms work together to clean suitable surfaces while reducing the need to remove spent blasting media afterwards.

44%

of surveyed industry decision-makers reported equipment-related interruptions at least monthly.

Source: ABB global survey

3,600

senior decision-makers across multiple sectors took part in the survey.

Source: ABB global survey

According to a global ABB report, 44% of surveyed industry decision-makers reported equipment-related interruptions at least monthly. The survey covered 3,600 senior decision-makers across multiple sectors.

Expert tip: For businesses considering dry ice blasting, the next step is to assess the equipment and the type of buildup before choosing a cleaning method.

Not sure if dry ice blasting suits your equipment?

Explore Dry Ice Blasting

A cleaner approach to industrial maintenance

A cleaner machine can mean less cleanup, but the right cleaning method can also make maintenance easier to manage.

However, grease, production residue and stubborn deposits gradually build up, making routine maintenance more demanding. The challenge is to remove the contaminants without introducing excess moisture, abrasive waste or additional cleanup.

61%

A recent survey highlighted that 61% of manufacturers surveyed had experienced unplanned downtime in the previous year, underlining the maintenance challenges.

This makes choosing the right cleaning method an important part of equipment care. Dry ice blasting uses solid CO2 pellets and compressed air to loosen contaminants without leaving spent blasting media behind.

For suitable machinery, this can reduce secondary cleanup and help streamline maintenance routines. Here are a few points worth pondering over before you choose your dry ice blasting services:

Less secondary cleanup

Dry ice blasting leaves no spent blasting media, reducing the extra work that comes with removing abrasive materials.

Minimal added moisture

Since dry ice turns directly into gas, the process can be useful for cleaning suitable equipment. Learn more about dry, non-conductive dry ice blasting.

Targeted contaminant removal

It can help remove grease, oils and stubborn production residue.

Maintenance-friendly cleaning

Professional dry ice blasting can help streamline cleaning routines and help your equipment last longer.

Ultimately, effective industrial maintenance is about more than removing visible dirt; it is about choosing a cleaning process that suits the equipment and its operating environment. Dry ice blasting offers a practical solution for businesses seeking to remove stubborn contamination without leaving spent blasting media behind.

So before selecting a method, businesses should evaluate their cleaning requirements, safety procedures and maintenance goals. Dry ice blasting can help simplify equipment cleaning while reducing secondary cleanup and supporting more organised industrial routines.

Compare our dry ice, soda and dustless blasting services.

View Blasting Services

Conclusion

Industrial cleaning should solve a problem instead of creating another one. From stubborn grease to accumulated production residue, choosing the right dry ice blasting services can make equipment maintenance more manageable.

The right service can help you take an effective approach for suitable industrial applications by using CO2 pellets to loosen contaminants. This can help reduce secondary cleanup while supporting cleaner and more effective maintenance routines.

When you hire a cleaning service, make sure it can deliver safe and reliable results.

Looking for a smarter way to clean industrial equipment?

Talk to Polar Blasting about dry ice cleaning for your site.

Book A Service Now

Frequently asked questions

What is dry ice blasting used for?

Dry ice blasting is used to clean suitable industrial machinery and selected surfaces. It can help remove grease, oils and stubborn production residue without leaving spent blasting media behind.

What are the pros of dry ice blasting?

Dry ice blasting uses recycled carbon dioxide pellets to clean surfaces through kinetic energy, thermal shock and sublimation. Its main advantages are less secondary cleanup, minimal added moisture, targeted contaminant removal and more maintenance-friendly cleaning routines.

How does dry ice blasting remove industrial contaminants without leaving residue?

Dry ice blasting removes industrial contaminants through a combination of kinetic energy, thermal shock and rapid gas expansion, as the dry ice turns directly from a solid into a gas on impact. Because the CO2 sublimates, no blasting media is left to clean up.